Contact us 
My Experiments 
The HANNA® HI83414 Multiparameter Benchtop Meter is a high-precision laboratory instrument designed for the simultaneous measurement of turbidity, free chlorine, and total chlorine in drinking water, wastewater, and environmental samples. Utilizing an advanced optical system with tungsten lamp technology, ratio nephelometric detection, and narrow-band interference filters, the HI83414 delivers highly accurate and reproducible measurements while minimizing stray light and color interferences.
This instrument integrates turbidity and chlorine analysis in a single benchtop platform, making it ideal for water treatment plants, environmental laboratories, regulatory agencies, and research facilities requiring reliable water quality monitoring.
Measurement Parameters
| Parameter | Range | Resolution | Accuracy |
|---|---|---|---|
| Turbidity (Ratio Mode) | 0.00 to 4000 NTU | 0.01 to 1 NTU | ±2% of reading ±0.02 NTU |
| Turbidity (Non-Ratio Mode) | 0.00 to 40.0 NTU | 0.01 to 0.1 NTU | High linearity low-range |
| Free Chlorine | 0.00 to 5.00 mg/L | 0.01 mg/L | ±0.02 mg/L @ 1.00 mg/L |
| Total Chlorine | 0.00 to 5.00 mg/L | 0.01 mg/L | ±0.02 mg/L @ 1.00 mg/L |
Additional turbidity units supported:
- NTU (Nephelometric Turbidity Units)
- EBC (European Brewing Convention Units)
- Nephelos Units
Optical System and Measurement Technology
The HI83414 features a sophisticated optical design incorporating:
- Tungsten filament lamp (stable light source)
- 90° scattered light detector for nephelometric turbidity measurement
- 180° transmitted light detector for ratio turbidity correction
- 525 nm narrow-band interference filter for chlorine measurement
- Silicon photodetector for high sensitivity detection
- Special optical glass cuvettes (25 mm path length) for maximum repeatability
Ratio measurement technology compensates for color interference and lamp intensity variations, ensuring accurate turbidity readings across a wide measurement range.
Calibration and Quality Assurance
Turbidity Calibration
Supports multi-point calibration using AMCO AEPA-1 primary standards:
- <0.1 NTU
- 15 NTU
- 100 NTU
- 750 NTU
- 2000 NTU
These standards are:
- USEPA-recognized primary reference standards
- Non-toxic and stable polymer suspension standards
- NIST traceable
- Supplied with Certificate of Analysis
Chlorine Calibration
Calibration is performed using CAL Check™ standards:
- Free chlorine: 1.00 mg/L
- Total chlorine: 1.00 mg/L
- NIST traceable validation standards
Regulatory Compliance
The HI83414 meets or exceeds major international regulatory standards:
- USEPA Method 180.1 (Turbidity)
- USEPA Method 330.5 (Chlorine)
- Standard Methods for the Examination of Water and Wastewater (2130 B, 4500-Cl G)
- EPA reporting requirements for drinking water monitoring
Data Management and Traceability
The instrument includes comprehensive data handling and quality assurance features:
- Internal memory for up to 200 logged measurements
- USB interface for PC data transfer
-
GLP (Good Laboratory Practice) functions including:
- Calibration date and time
- Calibration standards used
- Calibration traceability records
Display and User Interface
- Backlit graphic LCD display (128 × 64 pixels)
- Tutorial mode for guided operation
- Context-sensitive help function
-
Multiple measurement modes:
- Normal
- Average
- Continuous
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | HI83414-01 |
| Measurement Parameters | Turbidity, Free Chlorine, Total Chlorine |
| Turbidity Method | Ratio and non-ratio nephelometric |
| Chlorine Method | DPD colorimetric method |
| Light Source | Tungsten filament lamp |
| Detector | Silicon photocell |
| Cuvette Type | 25 mm optical glass |
| Memory | 200 records |
| Interface | USB |
| Display | Backlit graphic LCD |
| Environment | 0 to 50°C, max 95% RH |
| Dimensions | 230 × 200 × 145 mm |
| Weight | 2.5 kg |
| Power Supply | 115 V or 230 V |
| Warranty | 2 years |
Applications
The HI83414 is ideal for:
- Drinking water treatment plants
- Municipal water testing laboratories
- Wastewater treatment facilities
- Environmental monitoring laboratories
- Public health laboratories
- Research and academic institutions
- Industrial water quality monitoring
The HANNA HI83414 Multiparameter Benchtop Meter provides laboratory-grade measurement of turbidity and chlorine with EPA-compliant accuracy and advanced optical performance. With integrated calibration standards, GLP traceability, and high-precision optical technology, it is an essential instrument for ensuring drinking water safety, regulatory compliance, and reliable water quality analysis.
No resources are currently available for this product.
The HANNA® HI83414 Multiparameter Benchtop Meter is a high-precision laboratory instrument designed for the simultaneous measurement of turbidity, free chlorine, and total chlorine in drinking water, wastewater, and environmental samples. Utilizing an advanced optical system with tungsten lamp technology, ratio nephelometric detection, and narrow-band interference filters, the HI83414 delivers highly accurate and reproducible measurements while minimizing stray light and color interferences.
This instrument integrates turbidity and chlorine analysis in a single benchtop platform, making it ideal for water treatment plants, environmental laboratories, regulatory agencies, and research facilities requiring reliable water quality monitoring.
Measurement Parameters
| Parameter | Range | Resolution | Accuracy |
|---|---|---|---|
| Turbidity (Ratio Mode) | 0.00 to 4000 NTU | 0.01 to 1 NTU | ±2% of reading ±0.02 NTU |
| Turbidity (Non-Ratio Mode) | 0.00 to 40.0 NTU | 0.01 to 0.1 NTU | High linearity low-range |
| Free Chlorine | 0.00 to 5.00 mg/L | 0.01 mg/L | ±0.02 mg/L @ 1.00 mg/L |
| Total Chlorine | 0.00 to 5.00 mg/L | 0.01 mg/L | ±0.02 mg/L @ 1.00 mg/L |
Additional turbidity units supported:
- NTU (Nephelometric Turbidity Units)
- EBC (European Brewing Convention Units)
- Nephelos Units
Optical System and Measurement Technology
The HI83414 features a sophisticated optical design incorporating:
- Tungsten filament lamp (stable light source)
- 90° scattered light detector for nephelometric turbidity measurement
- 180° transmitted light detector for ratio turbidity correction
- 525 nm narrow-band interference filter for chlorine measurement
- Silicon photodetector for high sensitivity detection
- Special optical glass cuvettes (25 mm path length) for maximum repeatability
Ratio measurement technology compensates for color interference and lamp intensity variations, ensuring accurate turbidity readings across a wide measurement range.
Calibration and Quality Assurance
Turbidity Calibration
Supports multi-point calibration using AMCO AEPA-1 primary standards:
- <0.1 NTU
- 15 NTU
- 100 NTU
- 750 NTU
- 2000 NTU
These standards are:
- USEPA-recognized primary reference standards
- Non-toxic and stable polymer suspension standards
- NIST traceable
- Supplied with Certificate of Analysis
Chlorine Calibration
Calibration is performed using CAL Check™ standards:
- Free chlorine: 1.00 mg/L
- Total chlorine: 1.00 mg/L
- NIST traceable validation standards
Regulatory Compliance
The HI83414 meets or exceeds major international regulatory standards:
- USEPA Method 180.1 (Turbidity)
- USEPA Method 330.5 (Chlorine)
- Standard Methods for the Examination of Water and Wastewater (2130 B, 4500-Cl G)
- EPA reporting requirements for drinking water monitoring
Data Management and Traceability
The instrument includes comprehensive data handling and quality assurance features:
- Internal memory for up to 200 logged measurements
- USB interface for PC data transfer
-
GLP (Good Laboratory Practice) functions including:
- Calibration date and time
- Calibration standards used
- Calibration traceability records
Display and User Interface
- Backlit graphic LCD display (128 × 64 pixels)
- Tutorial mode for guided operation
- Context-sensitive help function
-
Multiple measurement modes:
- Normal
- Average
- Continuous
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | HI83414-01 |
| Measurement Parameters | Turbidity, Free Chlorine, Total Chlorine |
| Turbidity Method | Ratio and non-ratio nephelometric |
| Chlorine Method | DPD colorimetric method |
| Light Source | Tungsten filament lamp |
| Detector | Silicon photocell |
| Cuvette Type | 25 mm optical glass |
| Memory | 200 records |
| Interface | USB |
| Display | Backlit graphic LCD |
| Environment | 0 to 50°C, max 95% RH |
| Dimensions | 230 × 200 × 145 mm |
| Weight | 2.5 kg |
| Power Supply | 115 V or 230 V |
| Warranty | 2 years |
Applications
The HI83414 is ideal for:
- Drinking water treatment plants
- Municipal water testing laboratories
- Wastewater treatment facilities
- Environmental monitoring laboratories
- Public health laboratories
- Research and academic institutions
- Industrial water quality monitoring
The HANNA HI83414 Multiparameter Benchtop Meter provides laboratory-grade measurement of turbidity and chlorine with EPA-compliant accuracy and advanced optical performance. With integrated calibration standards, GLP traceability, and high-precision optical technology, it is an essential instrument for ensuring drinking water safety, regulatory compliance, and reliable water quality analysis.
No resources are currently available for this product.
![[48011050] Lovibond® T-CAL® Turbidity Standard (0.30 NTU, 500 ml)](/web/image/product.product/40710/image_512/%5B48011050%5D%20Lovibond%C2%AE%20T-CAL%C2%AE%20Turbidity%20Standard%20%280.30%20NTU%2C%20500%20ml%29?unique=96c5da2)